Posts

Over Budget Z50 Build- Saving the Sidecovers with some JB Weld.

Image
  So maybe not your typical 5-Minute craft, but check this out! The engine side covers on the Z50 build had some issues. Normally, I would have just left well enough alone, but... Figured it was time to try something new! Repaired a broken tab using some wire and JB Weld. GREAT stuff- have used it on lots of things with great success!!! JB Quick Weld- https://amzn.to/3RBV0Ag In other news- I may have had a *slight* fire in the shop... But I got it out, with almost no damage. Stay tuned for the full story! Oh, and here's the engine parts I bought. Points, condenser, and spark plug kit- https://ebay.us/9Ecz4o Rings- https://ebay.us/jSND6M Complete Gasket and Seal set- https://ebay.us/BFfRvJ Carburetor- https://ebay.us/UNN26M Generic bolt kit- https://ebay.us/JJlRGi Engine bolt kit- https://ebay.us/rVMsx3 Check out my new shirts!!! https://www.teepublic.com/user/rusty-phoenix-motors MORE on the Z50! Unwrapping the present- https://youtu.be/nF7fGDoRguY First proj...

Over-budget and behind schedule... Here's some Shop Talk!

Image
  So it's been a very fun, very full summer. And I've made good progress on the Z50 build... But. Summers over. Project's not done. And, I'm over budget. Well great. Good news is that I'm still not too deep into this bike. Bad news is, school is back in, and I'm a full time shop teacher. The first week of teaching is always a nightmare- there is no tired like first week teacher tired. I've got a few other vids in the works, but for this week, lets sit down and have a chat while I clean the workbench! Motorcycles have been my side hustle for years, and while I don't ever plan on selling this one, maybe I need to share how I make money off of them? Anyone interested in hearing those stories? Check out my new shirts!!! https://www.teepublic.com/user/rusty-phoenix-motors MORE on the Z50! Unwrapping the present- https://youtu.be/nF7fGDoRguY First project from the new location- https://youtu.be/ZlJJ6S9yV4o Tearing the bike apart- https://you...

CUSTOM paint in a rattle can!

Image
I am a huge fan of rattle can paint jobs, but they can be a little limiting when it comes to custom colors. Not anymore!!! I found a place fairly close to me that can mix any paint code up and stuff it into a spray can! Check them out here: Superior Paint Supply http://www.superiorpaintsupply.com/ Very reasonable- this can cost about $24 with tax, but price varies depending on what all goes into the can. I opted for a single stage because I never have had good luck with a top coat not peeling. What color? Porsche Mamba Green! Turned out FANTASTIC, love it! Paint code for this green is M6S. Painting is fairly straightforward- Sand all the old crap paint off, smooth it out, prime it, wet sand the primer, and then do your top coat. I ended up having to do 2 layers of primer, because the Krylon stuff I used was very runny. Lightly sanded the runs out after it had dried, gave it another light coat of primer, then on to the wet sanding. PATIENCE is key when working with ...

It looks like a real MOTORCYCLE!

Image
  Kinda tempted to turn this into an electric motorcycle... but... I think we'll stick with the good ole' internal combustion engine for now! SUPER EXCITED about this vid- it FINALLY looks like a minibike! I got the hubs repaired and mounted to the rims, got the suspension bolted to the frame, and the wheels bolted to the suspension. I walk you through assembling the cheap Chinese front end, installing the rear shocks, and installing the tires! Links to parts and tools used in this video: Front Fork: https://ebay.us/x83FoQ Rims: https://ebay.us/7kvnq9 Tube & Tire set: https://ebay.us/qCyJ6f Krylon Colormaxx gold paint: https://ebay.us/XZ7a5B Chain Tensioners: https://ebay.us/gl4voT Mini Exhaust: https://ebay.us/1ktq9w Brake Shoe Set: https://ebay.us/pZd1Bu Sprockets and Chain: https://ebay.us/Pk8jLu Fuel tank: https://ebay.us/pKBNle Fender Set: https://ebay.us/gA6QtA Front Brake Cable: https://ebay.us/iBsjX3 Rear Shocks: https://ebay.us/XkqIJp Throttle...

How to repair stripped threads!

Image
  THREE easy steps to fixing a stripped bolt hole: 1. Drill 2. Tap 3. Insert, insert! Seriously, I've installed hundreds of these things. With a few very simple tricks, you can install them with ease. Once installed, hela coils, heli coils, time serts, keen serts, or whatever brand of thread insert you're using can be actually stronger than the original threads! You can find the insert kits here: Metric: https://amzn.to/3d4Uprf Standard: https://amzn.to/3JIrZzX BOTH sets: https://amzn.to/3zys7Np And the Black and Decker power tools: Drill: https://amzn.to/3zXEynH Cheap drill (not as good): https://amzn.to/3oQIQGP Impact: https://amzn.to/3oYSLdr Assorted kit: https://amzn.to/3QnaMy5 Please note that the kit comes with the lower quality drill. Otherwise, I have used the skill saw, sawzall, and flashlight a TON and they all work FANTASTIC!!! I *DO NOT* know if the kit linked avoe comes with the fast charger. Mine originally did, but I've had it for sev...

Make a custom motorcycle seat cover!

Image
  While I'm waiting for parts to show up (yeah, finally ordered!!!) I decided it was time to get going on the seat cover. I am by no means an expert, or even a little familiar with making seat covers. I've done it a time or two, but this is by far the most complex cover I've attempted. I think it turned out pretty darn nice! It's not perfect, but if you're wanting perfect, you're in the wrong place. In these parts, we're rough around the edges! I would LOVE feedback from y'all especially if you have tips for me to use on the next one, because I'm sure I'll be doing this again! Thanks for watching! Links to options for supplies: Seat Foam: https://amzn.to/3PKHV6K Alternative cheaper Seat Foam: https://amzn.to/3oK6dlG (looks the same, untested though) Fusible Interfacing (one of many options): https://amzn.to/3OMj40X Upholstery Thread: https://amzn.to/3cXaXRZ Upholstery Sewing Needles: https://amzn.to/3Sr5x2a Tailors Pencil: https://amzn.t...

Mounting Tires, and BUILDING TOOLS!

Image
  Quick project update for you. Got the new rims painted, picked up the nuts and bolts, and mounted the tires. Turned out great! Wasn't totally happy with the paint, this stuff flows quite a bit differently than other paints I use. I think with a little more practice it would come out with a mirror finish though! For now, it's plenty good enough. What do you think of my new shop dust fan? I'll have a video on it coming out soon! Anyone have any good "chrome" paints they like to use? Thanks for watching! LINKS TO PARTS: Rims: https://ebay.us/7kvnq9 Tube & Tire set: https://ebay.us/qCyJ6f Krylon Colormaxx gold paint: https://ebay.us/XZ7a5B MORE on the Z50! Unwrapping the present- https://youtu.be/nF7fGDoRguY First project from the new location- https://youtu.be/ZlJJ6S9yV4o Tearing the bike apart- https://youtu.be/bS7nCPU0Xbg Painting the first bits- https://youtu.be/UgTwniWFIFo Making a seat cover- https://youtu.be/9JyLYj9KxYs Sealing a ...